Installation

METER: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY





(a) Connect the 2 connectors.

(b) Install the combination meter assembly with the 4 screws.

Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation

4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Reassembly

5. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Installation

6. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Installation

7. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab) Installation

8. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab) Installation

9. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab) Installation

10. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) Installation

11. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab) Installation

12. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab) Installation

13. INSTALL FRONT FLOOR FOOTREST Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)