Removal

SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab): REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Wait for at least 90 seconds after disconnecting the cable to prevent the air bag from working.

2. REMOVE FRONT DOOR SCUFF PLATE Removal

3. REMOVE REAR DOOR SCUFF PLATE Removal

4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

(a) Separate the front door opening trim weatherstrip to the extent which allows the removal of the center pillar lower garnish and center pillar upper garnish.





5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

(a) Separate the rear door opening trim weatherstrip to the extent which allows the removal of the center pillar lower garnish and center pillar upper garnish.





6. REMOVE LAP BELT OUTER ANCHOR COVER

(a) Disengage the 3 claws and remove the lap belt outer anchor cover.





7. REMOVE CENTER PILLAR LOWER GARNISH Removal

8. REMOVE CENTER PILLAR UPPER GARNISH Removal

9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

(a) Remove the nut and shoulder anchor.





(b) Disconnect the pretensioner connector as shown in the illustration.





(c) Remove the bolt and retractor.

10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

(a) Remove the bolt.





(b) Disengage the 2 claws and remove the front shoulder belt anchor adjuster.