Installation

1GR-FE EXHAUST: EXHAUST PIPE (except Regular Cab Standard Deck): INSTALLATION

1. INSTALL FRONT EXHAUST PIPE ASSEMBLY Installation

2. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

(a) Install the front No. 2 exhaust pipe to the exhaust pipe support.

(b) Install a new gasket and the front No. 2 exhaust pipe to the exhaust manifold LH with 3 new nuts.

Torque : 54 Nm (554 kgf-cm, 40 ft-lbf)

3. INSTALL CENTER EXHAUST PIPE ASSEMBLY Installation

4. INSTALL TAILPIPE ASSEMBLY Installation

5. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) Installation

6. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) Installation

7. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) Installation

8. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) Installation

9. INSPECT FOR EXHAUST GAS LEAK Installation