Removal
1GR-FE EMISSION CONTROL: AIR SWITCHING VALVE (for Bank 1): REMOVAL
1. REMOVE AIR CLEANER CAP AND HOSE
Remove the air cleaner cap and hose.
(1) Disconnect the mass air flow meter connector, vacuum hose and ventilation hose and detach the 4 clamps.
(2) Loosen the clamp.
(3) Detach the 4 hook clamps, and then remove the air cleaner cap and hose.
2. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
(a) Remove the air cleaner filter element.
Remove the 2 bolts and air cleaner case.
3. REMOVE AIR TUBE
Remove the 2 bolts, 2 nuts and air tube.
(a) Remove the 2 gaskets from the air tube.
NOTICE:
Be careful not to damage the installation surface of the gaskets.
4. REMOVE EMISSION CONTROL VALVE SET
Disconnect the emission control valve set connector.
(a) Disconnect the air hose from the emission control valve set.
Remove the 3 nuts and emission control valve set.