Power Mirror Switch: Testing and Inspection

MIRROR: OUTER MIRROR SWITCH: INSPECTION

1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)





(a) Check the resistance.

(1) Select "L" on the left/right adjustment switch.

(2) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

(3) Select "R" on the left/right adjustment switch.

(4) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)





(a) Inspect the outer mirror switch.

(1) Select "L" on the left/right adjustment switch.

(2) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

(3) Select "R" on the left/right adjustment switch.

(4) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

(b) Inspect the retract switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

3. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)





(a) Inspect the outer mirror switch.

(1) Select "L" on the left/right adjustment switch.

(2) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

(3) Select "R" on the left/right adjustment switch.

(4) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.

(b) Inspect the retract switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the outer mirror switch.