Removal

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

4. REMOVE STEERING PAD (w/o Steering Pad Switch) Removal

5. REMOVE STEERING PAD (w/ Steering Pad Switch) Removal

6. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector.





(b) Remove the 2 screws.

(c) Remove the switch, as shown in the illustration.