Removal

LIGHTING: HEADLIGHT DIMMER SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

4. REMOVE STEERING PAD (w/ Steering Pad Switch) Removal

5. REMOVE STEERING PAD (w/o Steering Pad Switch) Removal

6. REMOVE STEERING WHEEL ASSEMBLY Removal

7. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt) Removal

8. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column) Removal

9. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) Removal

10. REMOVE UPPER STEERING COLUMN COVER (for Manual Tilt) Removal

11. REMOVE UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column) Removal

12. REMOVE UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) Removal

13. REMOVE TILT AND TELESCOPIC MANUAL SWITCH (for Power Tilt and Power Telescopic Steering Column) Removal

14. REMOVE SPIRAL CABLE SUB-ASSEMBLY Removal

15. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Disconnect the connectors.





(b) Using a screwdriver, detach the claw and remove the windshield wiper switch.

HINT
Tape the screwdriver tip before use.

NOTICE:
If the claw is pressed forcefully, it will break.

16. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Disconnect the connector.





(b) While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch.





NOTICE:
If the claw is pressed forcefully, it will break.