Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch
WINDSHIELD / WINDOW GLASS: POWER WINDOW CONTROL SYSTEM (w/o Jam Protection Function): Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch
- Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch
DESCRIPTION
* If the front passenger side manual UP/DOWN function does not operate, there may be a malfunction in the power window regulator switch assembly, front passenger side motor, master switch or harness and connector.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR SWITCH - BATTERY)
(a) Disconnect the M2 switch connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Remove the power window regulator switch assembly Removal.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY Removal
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR SWITCH - FRONT PASSENGER SIDE MOTOR)
(a) Disconnect the M2 switch connector.
(b) Disconnect the M3 motor connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
(a) Remove the front passenger side motor Removal.
(b) Apply battery voltage to connector terminals 1 and 2.
(c) Check that the motor gear rotates smoothly as follows.
OK:
NG -- REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Removal
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (MASTER SWITCH - POWER WINDOW REGULATOR SWITCH)
(a) Disconnect the N2 master switch connector.
(b) Disconnect the M2 switch connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
for Regular Cab:
for Double Cab:
for CrewMax:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Remove the master switch Removal.
(b) Reconnect the master switch connector.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
for Regular Cab:
for Double Cab:
for CrewMax:
NG -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Removal
OK -- GO TO POWER WINDOWS DO NOT OPERATE AT ALL Power Windows do not Operate at All