Vehicle Stability Control System
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: DIAGNOSTIC TROUBLE CODE CHART
NOTICE:
When removing any parts, turn the ignition switch off.
HINT
* If no abnormality is found when inspecting parts, check the skid control ECU and check for poor contact at ground points.
* If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
* When 2 or more DTCs are detected, perform each circuit inspection until the problem is identified.
* All DTCs in the table below are detected in accordance with 1 trip detection logic.
DTC chart of ABS
DTC chart of VSC
Test Mode DTC of ABS
