Installation

1UR-FE COOLING: FAN: INSTALLATION

1. INSTALL FAN





(a) Install the fan to the fluid coupling with the 4 nuts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL FAN SHROUD

(a) Install the fan pulley to the fan bracket.

(b) Place the fan shroud together with the fluid coupling fan between the radiator and engine.

NOTICE:
Be careful not to damage the radiator core

(c) Temporarily install the fluid coupling fan to the fan bracket with the 4 nuts. Tighten the nuts as much as possible by hand.

(d) Attach the shroud's claws to the radiator as shown in the illustration.





(e) Install the shroud with the 2 bolts.

Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)

(f) w/ Trailer Towing System:





Pass the 2 hoses through the flexible hose clamp and close the clamp as shown in the illustration.

(g) Connect the reservoir hose to the upper radiator tank.

(h) Install the fan and generator V-belt Installation.

(i) Tighten the 4 nuts of the fluid coupling fan.

Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)





3. INSTALL INLET RADIATOR HOSE

(a) Install the inlet radiator hose.





HINT
The direction of each hose clamp is indicated in the illustration.

4. INSTALL AIR CLEANER ASSEMBLY Installation

5. ADD ENGINE COOLANT Service and Repair

6. INSPECT FOR COOLANT LEAK Testing and Inspection

7. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

8. INSTALL NO. 1 ENGINE UNDER COVER Replacement