Removal

1UR-FE EMISSION CONTROL: EGR VALVE: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

3. DRAIN ENGINE COOLANT Service and Repair

4. DISCONNECT NO. 12 WATER BY-PASS HOSE





Disconnect the No. 12 water by-pass hose.

5. DISCONNECT NO. 13 WATER BY-PASS HOSE





Disconnect the No. 13 water by-pass hose.

6. REMOVE EGR VALVE ASSEMBLY





Disconnect the 3 clamps and connector.





Remove the 4 nuts.





Remove the 2 bolts and EGR valve.





Remove the gasket from the No. 2 EGR pipe.

NOTICE:
Be careful not to damage the installation surface of the gaskets.





Remove the gasket from the intake manifold.

7. REMOVE EGR INLET





Remove the 2 bolts, EGR inlet and gasket.

NOTICE:
Be careful not to damage the installation surface of the gaskets.

8. REMOVE NO. 3 EGR PIPE SUB-ASSEMBLY





Remove the 2 nuts, No. 3 EGR pipe and gasket.

NOTICE:
Be careful not to damage the installation surface of the gaskets.

9. REMOVE EGR VALVE BRACKET





Remove the 3 bolts and EGR valve bracket.