Removal

1UR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER Replacement

2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

5. REMOVE THROTTLE BODY ASSEMBLY

(a) Disconnect the 2 water by-pass hoses.





(b) Disconnect the throttle position sensor and control motor connector.

(c) Remove the 4 bolts, throttle body and gasket.





(d) Remove the No. 12 water by-pass hose from the throttle body.





(e) Remove the No. 4 water by-pass hose from the throttle body.