Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Connect the connector.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the 3 bolts to install the instrument panel airbag.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL LOWER INSTRUMENT PANEL Installation

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT SIDE PANEL RH Installation

5. INSTALL COWL SIDE TRIM BOARD RH Installation

6. INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab) Installation

7. INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab, CrewMax) Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.