Installation

1UR-FE LUBRICATION: OIL PRESSURE SWITCH: INSTALLATION

1. INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY





Apply adhesive to 2 or 3 threads of the oil pressure sender gauge.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent





Install the oil pressure sender gauge.

Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

NOTICE:
Do not start the engine within 1 hour after installation.





Connect the sender gauge connector.

2. INSPECT ENGINE OIL LEVEL Testing and Inspection

3. INSPECT FOR OIL LEAK Replacement

4. INSTALL NO. 1 ENGINE UNDER COVER Replacement