Removal

AUDIO / VIDEO: STEREO JACK ADAPTER ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

4. REMOVE HEATER CONTROL ASSEMBLY Removal

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A) Removal

7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

8. REMOVE NO. 2 CONSOLE BOX RETAINER Removal

9. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

10. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY

(a) Detach the 2 claws and remove the stereo jack adapter.





11. REMOVE DOOR SCUFF PLATE ASSEMBLY RH Removal

12. REMOVE COWL SIDE TRIM BOARD RH Removal

13. REMOVE LOWER INSTRUMENT COVER LH Removal

14. REMOVE NO. 2 LOWER INSTRUMENT PANEL AIRBAG ASSEMBLY Removal

15. REMOVE INSTRUMENT PANEL BOX DOOR COVER Removal

16. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

17. REMOVE NO. 2 STEREO JACK ADAPTER ASSEMBLY

(a) Detach the 2 claws and remove the stereo jack adapter.