Outer Rear View Mirror
MIRROR (EXT): OUTER REAR VIEW MIRROR: INSPECTION
1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Side Turn Signal Light)
(a) Apply battery voltage and check the operation of the mirror.
OK:
If the result is not as specified, replace the outer rear view mirror assembly LH.
Text in Illustration
(b) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer rear view mirror assembly LH.
(2) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
It will take a short amount of time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly LH.
Text in Illustration
(c) Apply battery voltage to the connector and check the LED illumination condition.
OK:
If the result is not as specified, check the side turn signal light assembly LH Testing and Inspection.
Text in Illustration
2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Side Turn Signal Light)
(a) Apply battery voltage and check the operation of the mirror.
OK:
If the result is not as specified, replace the outer rear view mirror assembly LH.
Text in Illustration
(b) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer rear view mirror assembly LH.
(2) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
It will take a short amount of time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly LH.
Text in Illustration
3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Side Turn Signal Light)
(a) Apply battery voltage and check the operation of the mirror.
OK:
If the result is not as specified, replace the outer rear view mirror assembly RH.
Text in Illustration
(b) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer rear view mirror assembly RH.
(2) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
It will take a short amount of time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly RH.
Text in Illustration
(c) Apply battery voltage to the connector and check the LED illumination condition.
OK:
If the result is not as specified, check the side turn signal light assembly RH Testing and Inspection.
Text in Illustration
4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Side Turn Signal Light)
(a) Apply battery voltage and check the operation of the mirror.
OK:
If the result is not as specified, replace the outer rear view mirror assembly RH.
Text in Illustration
(b) Check the mirror heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer rear view mirror assembly RH.
(2) Apply battery voltage and check the operation of the mirror heater.
OK:
HINT
It will take a short amount of time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly RH.
Text in Illustration
