Installation

AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION

1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET

(a) Install the No. 1 multi-media interface bracket with the bolt.

2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET

(a) Install the No. 2 multi-media interface bracket with the bolt.

3. INSTALL MULTI-MEDIA INTERFACE ECU

(a) Install the multi-media interface ECU with the 2 nuts.

Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)

(b) Connect the connector.

4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

7. INSTALL LOWER INSTRUMENT COVER LH Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

10. INSTALL COWL SIDE TRIM BOARD RH Installation

11. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Installation.