Installation

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD): INSTALLATION

1. INSTALL PROPELLER SHAFT ASSEMBLY

(a) Remove SST from the extension housing.

SST : 09325-40010

(b) Install the propeller shaft assembly to the extension housing.

(c) Align the matchmarks on the propeller shaft flange and differential flange.

(d) Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

Torque : 88 Nm (899 kgf-cm, 65 ft-lbf)