Removal

EXTERIOR PANELS / TRIM: AUTOMATIC RUNNING BOARD: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE ROCKER PANEL MOULDING (for X-Runner)



2. REMOVE STEP PLATE

(a) Using a 5 mm hexagon wrench, remove the 4 hexagon bolts and step plate.





3. REMOVE POWER LIFT STEP ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 bolts, 2 nuts and power lift step assembly.