Removal
INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL
1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
(a) Open the instrument cluster finish panel lid.
(b) Put protective tape around the No. 1 instrument cluster finish panel garnish.
(c) Grip the No. 1 instrument cluster finish panel garnish and pull it diagonally upward toward the rear to detach the 5 clips and remove the No. 1 instrument cluster finish panel garnish.
Text in Illustration
2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
HINT
Use the same procedure described for the No. 1 instrument cluster finish panel garnish.
3. REMOVE FRONT NO. 1 CONSOLE BOX INSERT
(a) Detach the 2 clips and 2 guides and remove the front No. 1 console box insert.
4. REMOVE FRONT NO. 2 CONSOLE BOX INSERT
(a) Detach the 2 clips and guide and remove the front No. 2 console box insert.
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
(a) Twist the shift lever knob in the direction indicated by the arrow and remove it.
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)
(a) Twist the shift lever knob in the direction indicated by the arrow and remove it.
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
(a) Put protective tape around the upper console panel.
Text in Illustration
(b) Using a moulding remover, detach the 10 clips.
(c) Disconnect each connector and remove the upper console panel.
Text in Illustration
8. REMOVE NO. 2 CONSOLE BOX RETAINER
(a) Detach the clips, 2 claws and 2 guides and remove the No. 2 console box retainer.
9. REMOVE REAR CONSOLE BOX ASSEMBLY
(a) Remove the 4 bolts.
(b) Detach the 2 guides.
(c) Disconnect each connector and remove the rear console box.