Installation

1GR-FE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL WATER INLET WITH THERMOSTAT

(a) Install a new gasket and the water inlet with thermostat with the 3 nuts.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

2. CONNECT NO. 2 RADIATOR HOSE

(a) Connect the No. 2 radiator hose.

3. ADD ENGINE COOLANT Service and Repair

4. INSPECT FOR ENGINE COOLANT LEAK Testing and Inspection

5. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL FRONT BUMPER COVER LOWER Installation

7. INSTALL V-BANK COVER Installation

8. INSTALL UPPER RADIATOR SUPPORT SEAL Installation