Front Fog Light Circuit

LIGHTING (EXT): LIGHTING SYSTEM: Front Fog Light Circuit
- Front Fog Light Circuit

DESCRIPTION

The main body ECU receives headlight dimmer switch information signals, and illuminates the front fog light.

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Inspect the fuses and bulbs for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. PERFORM ACTIVE TEST USING TECHSTREAM (FRONT FOG LIGHT RELAY)

(a) Using the Techstream, perform the Active Test Exterior Lighting System.

Main Body





OK:

Front fog light relay operates (front fog lights come on).

NG -- CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Removal

2. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Exterior Lighting System

OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (DRIVER SIDE JUNCTION BLOCK ASSEMBLY - FOG LIGHT ASSEMBLY)