Door Mirror Foot Light Circuit

LIGHTING (INT): LIGHTING SYSTEM: Door Mirror Foot Light Circuit
- Door Mirror Foot Light Circuit

DESCRIPTION

The main body ECU controls the door mirror foot light.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. PERFORM ACTIVE TEST USING TECHSTREAM (DOOR MIRROR FOOT LIGHT)

(a) Using the Techstream, perform the Active Test Interior Lighting System.

Main Body





OK:

Door mirror foot light comes on.

NG -- CHECK HARNESS AND CONNECTOR (OUTER MIRROR - MAIN BODY ECU AND BODY GROUND)

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Interior Lighting System

2. CHECK HARNESS AND CONNECTOR (OUTER MIRROR - MAIN BODY ECU AND BODY GROUND)

(a) Disconnect the I4 and H4 outer mirror connectors.

(b) Disconnect the F10 main body ECU connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

for LH
for RH










NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Interior Lighting System