Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL NO. 2 TELEPHONE BRACKET

(a) Install the bracket with the 2 bolts.

2. INSTALL NO. 1 TELEPHONE BRACKET

(a) Install the bracket with the 3 bolts.

(b) Connect the 2 connectors.

3. INSTALL MAYDAY BATTERY WITH BRACKET

(a) Attach the 2 claws to install the mayday battery.

(b) Install the bracket with the bolt.

Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

4. INSTALL DCM (TELEMATICS TRANSCEIVER)

(a) Insert the DCM (telematics transceiver) with bracket into the vehicle.

(b) Install the DCM (telematics transceiver) with bracket with the bolt and nut.

for bolt A - Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

for nut B - Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)





(c) Connect the connectors.

5. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

7. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

8. INSTALL LOWER INSTRUMENT COVER LH Installation

9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

10. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

11. INSTALL COWL SIDE TRIM BOARD RH Installation

12. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Installation.

15. PERFORM REGISTRATION

(a) Perform registration DCM Activation.

NOTICE:
When replacing the mayday battery or DCM (telematics transceiver) (together with the mayday battery), perform registration.