Removal
HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
2. REMOVE NO. 2 SWITCH HOLE BASE Removal
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
5. REMOVE COMBINATION METER ASSEMBLY Removal
6. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
(a) Disconnect the connector and hose.
(b) Detach the 2 claws and remove the cooler thermistor.