Removal

WIPER / WASHER: WASHER MOTOR (for Rear Side): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT BUMPER COVER

(a) except X-Runner:

Remove the front bumper cover Removal.

(b) for X-Runner:

Remove the front bumper cover Removal.

3. REMOVE FRONT FENDER LINER RH

(a) Remove the front fender liner Removal.

4. DRAIN WASHER FLUID Removal

5. REMOVE WASHER INLET SUB-ASSEMBLY Removal

6. REMOVE WASHER JAR Removal

7. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY

(a) Remove the rear washer motor and pump from the packing of the washer jar.