Removal

1AR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

6. REMOVE ECM

(a) Disconnect the 6 ECM connectors.





(b) Disconnect the tire pressure warning ECU connector and remove the nut and tire pressure warning ECU.





(c) Separate the 2 wire harness clamps.





(d) Remove the 2 nuts, bolt and ECM with the ECM bracket.

(e) Remove the 4 screws and 2 ECM brackets from the ECM.