Removal

1AR-FE STARTING: STARTER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

4. REMOVE BATTERY Removal

5. REMOVE NO. 2 INLET AIR CLEANER Removal

6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Removal

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE AIR CLEANER BRACKET Removal

10. REMOVE NO. 1 INLET AIR CLEANER Removal

11. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Open the terminal cap, remove the nut and disconnect the starter wire.

(c) Remove the 2 bolts and starter.