Removal

EXTERIOR: FRONT BUMPER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY Removal

3. REMOVE FRONT BUMPER ASSEMBLY

(a) Put protective tape around the front bumper assembly.





Text in Illustration





(b) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn each pin 90 degrees and remove the 2 pin hold clips.

HINT
Use the same procedure for the RH side and LH side.

(d) Remove the 8 screws and 3 clips.





(e) Disengage the 5 claws and disconnect the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(f) Disconnect each fog light connector, and then remove the front bumper assembly.