Check Control Module Versions (Function 01)
- Connect VAG 1551 scan tool. VAG 1551 Scan Tool Connecting
- Initiate On Board Diagnostic (OBD). On Board Diagnostic, Initiating Program
- Switch ignition on.
- Switch printer on with "PRINT" button (warning lamp in button lights up).
- Press buttons -0- and -1- to select "Check Control Module Versions" function 01.
Indicated on display
Rapid data transfer Q
01 - Check Control Module Versions
- Press -Q- button to confirm input.
1J0 959 799H Conv. cent. CU 0062 ->
Coding XXXXX WSC XXXXX
The control module identification of the central control module for comfort system -J393- (Conv. cent. CU) is indicated on the VAG 1551 scan tool display.
Breakdown Of The Display
- Control module Part No.1J0 959 799H: (for up-to-date control module version see parts catalog microfiche)
- Comfort system = system designation
- VXX = software version
- Coding XXXXX = code variations
- WSC = dealer code number
- Press -> button
Indicated on display (briefly)
Please wait
and then the following appears in the display:
The driver's door control module identification is indicated on the VAG 1551 scan tool display.
1J0 959801 B Door CU DS0022 ->
- Press -> button
Indicated on display (briefly)
Please wait
and then the following appears in the display:
The passenger's door control module identification is indicated on the VAG 1551 scan tool display.
3B0 959 802 Door CU PS0022 ->
- Press ->button.
NOTES:
- If one of the malfunction types appear in the display, the possible causes of the malfunction can be printed out by pressing the "HELP" button.
Rapid data transfer HELP
Control module does not answer
- The ignition must be switched on.
Rapid data transfer HELP
K wire not switching to B+
- Malfunctions have occurred at the start of or during the program (external interference?).
Rapid data transfer ->
No signal from control module
- Check wiring connections for Data Link Connector (DLC), as well as voltage supply and Ground (GND) connections.
Rapid data transfer ->
Error in communication link
- Press buttons -0- and -6- to select End Output" function 06.
Indicated on display
Rapid data transfer Q
06 - End Output
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP ->
address word XX
- Switch ignition off.
- Disconnect scan tool from Data Link Connector (DLC).
Rapid data transfer Q
01 - Check Control Module Versions
- Press -Q- button to confirm input.
The control module identification of the central control module for comfort system -J393- (Conv. cent. CU) is indicated on the VAG 1551 scan tool display.
1J0 959 799H Conv. cent. CU 0062 ->
Coding XXXXX WSC XXXXX
Breakdown of the display
- 1J0 959 799H: Part No. of control module (for up-to-date control module version See parts catalog microfiche).
- Comfort system = system designation
- V00 = software version
- Coding XXXXX = coding variants
- WSC = dealership number
- Press -> button
Indicated on display (briefly)
Please wait
and then the following appears in the display:
The control module identification of the driver's door control module is indicated on the VAG 1551 scan tool display.
1J0 959 801 B Door CU DS0022 ->
- Press -> button.
Indicated on display (briefly)
Please wait
and then the following appears in the display:
The control module identification of the passenger's door control module is indicated on the VAG 1551 scan tool display.
3B0 959 802 Door CU PS0022 ->
- Press -> button.
NOTES:
- If one of the malfunction types appear in the display, the possible causes of the malfunction can be printed out by pressing the "HELP" button.
Rapid data transfer HELP
control module does not answer
- The ignition must be switched on.
Rapid data transfer HELP
K wire not switching to B+
- Malfunctions have occurred at the start of or during the program (external interference?).
Rapid data transfer ->
No signal from control module
- Check wiring connections for Data Link Connector (DLC), as well as voltage supply and Ground (GND) connections.
Rapid data transfer ->
Error in communication link
- Press buttons -0- and -6- to select "End Output" function 06.
Indicated on display
Rapid data transfer Q
06 End Output
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP
Insert address word XX
- Switch ignition off.
- Disconnect scan tool from Data Link Connector (DLC).