Operation CHARM: Car repair manuals for everyone.

Reading



Transmission With Hydraulic Regulation -E17-

Read Measuring Valve Blocks

A differentiation is made between two types of transmissions:
- Transmissions with hydraulic regulation -E17- , on which the transmission input speed sensor (inductive sensor) is secured to the underside of the valve body.
- Transmissions with hydraulic regulation -E18/2-, on which the transmission input speed sensor is secured behind valve body at transmission housing.

Read measured value block for transmission with hydraulic regulation E17.. See Page 01-131

Read measured value block for transmission with hydraulic regulation E18/2. See Page 01-158

Transmission With Hydraulic Regulation -E17-, Read Measuring Valve Block

Additional information
- Electrical Wiring Diagrams, Troubleshooting & Component Locations binder, Passat 1997.

Test sequence
- Connect scan tool V.A.G 1551 and enter address word "02 Transmission electronics" and advance until "Select function XX" indicated on display See Page 01-31.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press keys 0 and 8. (The function "Read measured value block" is selected with 08.)

Indicated on display:


Rapid data transfer Q
08 - Read measured value block


- Confirm entry with key Q.

Indicated on display:


Read measured value block HELP
Input display group number XXX


- Enter display group number.
- Confirm entry with key Q.

Read measured value block 1->
->1->2->3->4


- There are always 4 display zones in the measured value block (if necessary in physical quantities). Decoding the individual values in display zones 1 to 4. Measured Value Blocks Test Table


List Of Selectable Display Group Numbers

Indicated on display(example)

Display Group 001 - 004


Display Group No. 001 - 004:






Display Group 005 - 008


Display Group No. 005 - 008:






Display Group 009 - 011


Display Group No. 009 - 011:






NOTE:
- If the printer is switched on, the current display is printed out on the log.
- If the specified valves are obtained in all the display zones:
- Press-> key.

Indicated on display


Rapid data transfer HELP
Select function XX