Output Diagnostic Test Mode (DTM)
Output Diagnostic Test Mode (DTM)
Blinkers are activated via output Diagnostic Test Mode (DTM).
Tools
Special tools, testers and auxiliary items required
- Fault read out device V.A.G 1551 or Mobile Scan Tool (ST) V.A.G 1552 with cable Diagnostic cable adapter V.A.G 1551/3
- Connector test set V.A.G 1594
- Diode test lamp V.A.G 1527
- Wiring diagram
Work procedure
- Fault read out device V.A.G 1551, connecting.
- Initiate On Board Diagnostic (OBD). On Board Diagnostic (OBD) For Radio-Frequency Remote Control For Central Locking, Initiating
Indicated on display:
Rapid data transfer HELP
Select function XX
- Operate scan tool according to indications on display:
- Enter 03 for function "Output Diagnostic Test Mode (DTM)".
Indicated on display:
Rapid data transfer Q
03 - Output Diagnostic Test Mode (DTM)
- Press Q button to confirm input.
Indicated on display:
Output Diagnostic Test Mode (DTM) -->
- Press --> -button.
Blinkers are activated and remain constantly lit.
- Press --> -button.
Indicated on display:
Output Diagnostic Test Mode (DTM) -->
DONE
- Press --> -button.