Removal and Replacement

Lock Carrier With Attachments, Removing And Installing







1 - Lock carrier with attachments

Removing
- Unhook Bowden cable at lock and disconnect electrical connectors.
- Disconnect connectors at headlight housings.
- Removing front bumper and bumper carrier.
- Disconnect hose for headlight cleaning system at T-piece.
- Unbolt radiator and condenser from lock carrier.
- Secure radiator and condenser in engine compartment.

NOTE:
- Do not unhook condenser at lines.
- Condenser lines must not be kinked.

Installing
- Align lock carrier at longmembers and between fenders.

Gaps dimensions. Body panel gaps; Body, front

- Adjust headlights.

2 - Bolt
- Qty. 2
- 8 Nm

3 - Bowden cable
4 - Hole in side panel
5 - Radiator and condenser
6 - Bolt
- Qty. 4
- 8 Nm

7 - Bumper carrier
8 - Bolt
- Qty. 4
- 20 Nm

9 - Guide rods 3411