Evaporative Emissions System Components Removing and Installing

Evaporative Emissions System Components, Removing and Installing





1. - Leak Detection Pump (LDP) -V144-
- In left rear wheel housing behind wheel housing liner
- Checking, Testing and Inspection
2. - 10 Nm (7 ft. lbs.)
3. - Bracket for leak detection pump
4. - Harness connector
- 3-pin
5. - Coupling
- Press together at front to release
6. - Connecting hose
- Pressure side
7. - Connecting hose
- Suction side
8. - Air cleaner for leak detection pump
9. - Connector
10. - Connecting line
11. - Evaporative Emissions (EVAP) canister
- In spare wheel well on vehicle floor
12. - 10 Nm (7 ft. lbs.)
13. - To EVAP purge canister regulator valve -N80
- In engine compartment on air cleaner, item 11, Evaporative Emissions System, Overview
14. - Vent line
- From change-over valve on fuel tank, item 10, Fuel Supply System Components, Removing and Installing
15. - Vacuum line
- To throttle valve control module -J388-, item 9, Evaporative Emissions System, Overview
16. - Connecting hose
- Vacuum side
17. - Elbow