Air Injection Pump: Service and Repair

Secondary Air Injection (AIR) system components, removing and installing

Secondary Air Injection (AIR) Pump Motor -V101- Assembly Overview

Note: Components marked with an * are checked by the On Board Diagnostic (OBD)

- Components marked with ** are checked by the output diagnostic test mode.

1. Secondary Air Injection (AIR) pump motor V101 */**
2. Front right - longitudinal member
3. 10 Nm
4. Bracket





- For secondary air injection pump motor
- Secured to intake manifold
5. Insulation ring
- Securing collar must face to pump eye
6. Protective cap
7. Connector
- For secondary air injection pump motor
- Black, 2-pin
8. To connecting pipe
9. Pressure hose
- Ensure seated tightly
- Press together at front to release
10. O-Ring
- Always replace
11. Intake hose
- Ensure seated tightly
- Press together at front to release
12. From air cleaner upper part