Instrument Cluster From 05.00, Coding (Function 07)

Instrument Cluster 05.00 >, Coding (function 07)

Using this function the instrument cluster can be coded as follows:
- Available equipment activation
- Market versions
- Service Intervals
- Distance impulse number (K-number)


NOTE: The code table lists only those combinations applicable to Golf/Jetta through from 05.00 >.


Initiating coding
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch on ignition and enter address word 17 "instrument cluster".
- Press -Q- button to confirm input.
- Press -> button until "Select function"is displayed.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code control module" function 07.

Indicated on display:


Rapid data transfer35GQ
07 - Code control module


- Press -Q- button to confirm input.

Indicated on display:


Code Control Module
Enter code number XXXXX (0-32000)


- Determine vehicle particulars and input code number using coding table.

Example:


NOTE: Values shown below are examples only!!


02 Available equipment: seatbelt warning active
2 Market version: USA
3 Service Interval
2 Distance impulse number

Indicated on display (example only):


Code Control Module Q
Enter code number 02232 (0-32000)


- Press -Q- button to confirm input.

Indicated on display (example only):


1J0919860D A4 COMBI INSTR VDO V04 ->
Coding 02232 WSC 00000


- Press -> button.

Indicated on display:


Rapid data transfer HELP
Select function XX


End function:
- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display:


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer Help
Enter address word XX


The tester is now in basic function again.

Code table:







Distance impulse number, determining

Engine/Transmission Code:
combinations:

all engines with 5-speed automatic 4
transmission

all other engine/transmission 2
combinations