Securing Engine to Assembly Stand

Securing Engine to Assembly Stand

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)





Secure engine to engine and transmission stand (VAS 6095) when working on engine.

Procedure

- Remove transmission.

• To separate engine and transmission: --> Operating instructions for scissor-type assembly platform (6131)

- After separating engine from transmission, secure torque converter to prevent it from "falling out".

- Attach lifting tackle (3033) as follows and lift engine from engine and transmission holder (VAS 6100) using shop crane (6131).





• Vibration damper side: Position 3

• Flywheel side: Position 11

• The positions of lifting tackle (3033) inscribed with 1 to 12 point toward flywheel side.

• Threaded spindles are set in length according to necessity.

- Fasten engine to engine and transmission holder (VAS 6095).