Exhaust System Components

Exhaust System Components

CAUTION!
When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

• Route lines of all types (e.g. for fuel, hydraulic, EVAP canister system, coolant and refrigerant, brake fluid, vacuum) and electrical wiring so that the original path is followed.

• Ensure sufficient clearance to all moving or hot components.

• After exhaust system repairs, make sure exhaust system is not under stress and that it has sufficient clearance from the bodywork. If necessary, loosen double clamps and the repair double clamp and align exhaust pipe so that sufficient clearance is maintained to the bodywork and support rings carry uniform loads.

• Replace self-locking nuts.

Special tools, testers and auxiliary items required

• Ring spanner 7 piece set (3337)