68 Pin Test Box Adapter, Installing

68 Pin Test Box Adapter, Installing

Test requirements

• Ignition switched off.

Work procedure

When the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) (J248) electrical harness connector is disconnected, the adaptation values are erased and the DTC memory content remains intact.

Procedure

- Remove the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) (J248). Refer to => [ Engine Control Module, Replacing ] Engine Control Module, Replacing.

- Disconnect the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) (J248) electrical harness connector.

- Connect the Adapter - 68 Pin (VAG1598/18) to the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) (J248) electrical harness connector.