Selector Lever Cable, Checking Adjustment

Selector Lever Cable, Checking Adjustment

- Pull selector lever out of position "P" with button pressed approx. 5 mm toward rear and hold, do not shift into "R".

- Release selector lever.

• Selector lever must spring back into position "P" automatically, adjust selector lever if necessary => [ Selector Lever Cable, Adjusting ] Selector Lever Cable, Adjusting.

- Place selector lever in position "N".

- Pull selector lever out of position "N" with button pressed approx. 5 mm toward rear and hold, do not shift into "D".

- Release selector lever.

• Selector lever must spring back into position "N" automatically, adjust selector lever if necessary => [ Selector Lever Cable, Adjusting ] Selector Lever Cable, Adjusting.

- Press selector lever out of position "N" with button pressed approx. 5 mm toward front and hold, do not shift into "R".

- Release selector lever.

• Selector lever must spring back into position "N" automatically, adjust selector lever if necessary => [ Selector Lever Cable, Adjusting ] Selector Lever Cable, Adjusting.

- Check shift mechanism => [ Shift Mechanism, Checking ] Procedures.