Selector Lever Handle

Selector Lever Handle

Removing

- Place selector lever in position "P".

- Slide sleeve - 1 - downward.





- Pull button - 2 - out of handle - 4 - until it stops - arrow -.

- Secure button from springing back e.g. using a wire bracket - 3 -.

- remove selector lever handle.

Installing

- Place selector lever in position "P".

- Pull button - 2 - out of handle - 4 - until it stops - arrow -.





- Secure button from springing back e.g. using a wire bracket - 3 -.

Installation position: Switch faces driver.

- Press handle onto selector lever up to stop.

- Remove wire bracket.

- Press button - 2 - in order to secure it. Button must now spring back to stop again.

- Rotate and slide sleeve - 1 - upward until tabs in sleeve engage and lock audibly into slots of handle - 4 -.