Coolant Fan Mount

Coolant Fan Mount

Special tools, testers and auxiliary items required

• Torque wrench (5 to 50 Nm) (VAG 1331)

Removing

- Drain the cooling system. Refer to --> [ Cooling System, Draining and Filling ] [1][2][3]Cooling System, Draining and Filling.

- Remove retaining clamps for upper coolant hose, remove bolt - 1 -.





- Disconnect upper coolant hose from radiator.

- Remove front bumper.

- Bring the lock carrier into service position. Refer to --> Body Exterior. Radiator Support

- Disconnect harness connectors for radiator fan.

- Disengage retainer - arrows - and remove fan mount upward.

Installing

Installation is performed in the reverse order of removal, noting the following:

- The coolant fan mount must engage into mounting points intended for it.

- Fill the cooling system. Refer to --> [ Cooling System, Draining and Filling ] [1][2][3]Cooling System, Draining and Filling.