Level Control System Sensor

Level Control System Sensor

Special tools, testers and auxiliary items required

• Torque wrench (VAG 1410)

Removing

- Remove the front wheel housing liner.

- Disconnect the connector - 4 - from the vehicle level sensor - 3 -.





- Remove the pin in - direction of arrow - and unclip the connecting link from the upper control arm.

- Remove screws - 1 -. Do not bend the bracket - 2 -.

Installing

Installation is the reverse of removal, with special attention to the following:

- Install the front wheel housing liner.

- Perform a basic setting on the level control system using --> vehicle diagnosis, testing and information system (VAS 5051B) "Guided Functions".

Tightening Specifications