Shift Mechanism Cover

Shift Mechanism Cover

Removing

- Remove selector lever handle. Refer to --> [ Selector Lever Handle ] Selector Lever Handle.

- The procedure for disconnecting the battery must absolutely be obeyed.

- Disconnect battery ground (GND) cable with ignition switched off.

- Remove cover from the center console..

- Disconnect connector - 1 -.





- Carefully pull off the retaining clips - 2 - on the left and right from the frame.

Installing

Installation is performed in the reverse order of removal. Pay attention to the following:

- Install cover to the center console..

- Connect the negative battery cable.

- Install selector lever handle. Refer to --> [ Selector Lever Handle ] Selector Lever Handle.