Camshaft Adjustment Valve 1 (N205)

Camshaft Adjustment Valve 1 (N205)

Special tools, testers and auxiliary items required

• Ratchet Insert 1/4" (VAS 6234)

• TORX(R) Bit Set (V.A.G 1766)

• Spring Type Clip Pliers (VAS 5024 A)

• Torque Wrench (5-60 Nm) (V.A.G 1783)

Removing

- Disconnect the connector - 1 -.






- Loosen the wiring harness - 2 - from the bracket.

- Remove the bolt - 3 -.

• Do not pull out the camshaft adjustment valve 1 by the connector.

- Remove the bolts - arrows - and pull the camshaft adjustment valve 1 out of the housing.






Installing

• The camshaft adjustment valve 1 as well as the housing must be free of dirt and contaminants.

• Remove the new camshaft adjustment valve 1 from is packaging only prior to installation.


• The camshaft adjustment valve 1 must not be subjected to knocks and impacts.

- Lubricate the seal with engine oil.

- Carefully insert the camshaft adjustment valve 1 into the housing and press it perpendicular to the valve axis in by hand until it is seated.

- Tighten the bolts to 4 Nm.

Further installation is in reverse order of removal.