Power Trunk / Liftgate Lock Actuator: Service and Repair

Rear Lid Release Element

• If rear lid does not open, it can opened by hand via the emergency release - 3 - on lid lock - 4 -. Emergency release is accessed through an opening in the rear lid trim.

Removing





- Remove rear lid trim

- Rear window washer motor, removing

- Disconnect harness connector - 7 - from unlocking element - 1 -.

- Remove the bolts - 2 -.

- Disengage unlocking element opposite - arrow - angle brackets - 6 -.

- Then you can remove the unlocking element - 1 -.

Installing

To install, perform the steps used for removal in reverse order.

- Tightening specifications: Unlocking element bolts 4 Nm

• Before the rear lid is closed, a function test of the unlocking components must be performed.