Brake Pedal and Brake Booster

Brake Pedal and Brake Booster

Special tools, testers and auxiliary items required

• Release Tool (T10159)

- Remove trim on driver side.

- First press brake pedal in direction of brake booster and hold.





2 Pressure rod
3 Retaining lugs

- Insert (T10159) and pull in direction of driver seat. When doing this, counter-hold on brake pedal. (At this moment the pedal must not be allowed to move backward). The mounting retaining lugs - 3 - will thereby be pressed off the ball head of the push rod - 2 -.

The process of separating the brake pedal from the brake booster is shown with the pedal assembly removed.

- Pull (T10159) and brake pedal together toward the driver seat. (The brake pedal will thereby be pulled off the ball head of the push rod).

Connecting

- Hold the push rod ball head in front of the mount and push the brake pedal toward the brake booster until the ball head engages audibly.





Further installation is in the reverse sequence to removal.