Fan Shroud: Service and Repair

Fan Shroud with Fans

Special tools, testers and auxiliary items required

• Torque Wrench (5-50 Nm) (V.A.G 1331)

Removing

- Remove the air guide bolts - arrows - and remove the intake air guide - A -.





- Remove the upper fan shroud bolts - upper arrows -.





- Remove the noise insulation.

- Unclip the coolant hose from the fan shroud.

- Disconnect the connector - 1 - and remove the lower fan shroud bolts - lower arrows -.





- Remove the fan shroud with the fans downward.

- Disconnect the harness connector - 1 - and lay the wires free.





- Remove the fan nuts - arrows - and remove the fans, if necessary.

Installing

Installation is performed in the reverse order of removal, noting the following:

Tightening Specifications