Center and Rear Muffler Separating

Center and Rear Muffler Separating

• A separating point has been provided in the connecting pipe for removing, installing and individual replacement of the center or rear muffler.

• The separating point is marked by a depression around the circumference of the exhaust pipe.

Special tools, testers and auxiliary items required

• Body Repair Saw (V.A.G 1523 A)

or

• Chain Pipe Cutter (VAS 6254)

• Protective Eyewear

Procedure

CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.

- Cut the exhaust pipe at the separation point - arrow - using (V.A.G 1523 A) at a right angle.





- Position the clamping sleeve at the side marks when installing.

- When installing the clamping sleeve, ensure that the bolt end - arrow - does not project beyond the lower edge of the clamping sleeve.





- Align the exhaust system so that the distance - a - is equal on the right and left sides.