Mufflers and Mounts Overview

Mufflers and Mounts Overview

Center and rear muffler, separating. Refer to => [ Center and Rear Muffler Separating ] Center and Rear Muffler Separating.





1 from Front Muffler

2 Clamping Sleeve

• M8 - 25 Nm

• M10 - 40 Nm

• Tighten the bolts evenly.

3 Retaining Loop

• Replace if damaged.

4 Suspended Mount

• For the center muffler.

5 Bolt

• 25 Nm

6 Center Muffler

• Original equipment as one unit with the rear muffler. For repairs, replace each separately.

• Separating exhaust system. Refer to => [ Center and Rear Muffler Separating ] Center and Rear Muffler Separating.

7 Rear muffler

• Original equipment as one unit with the center muffler. For repairs, replace each separately.

• Separating exhaust system. Refer to => [ Center and Rear Muffler Separating ] Center and Rear Muffler Separating.

8 Suspended Mount

• For the rear muffler.

9 Clamping Sleeve

• M8 - 25 Nm

• M10 - 40 Nm

• For repairs.

• For individual replacement of the center and rear mufflers.

• Tighten the bolts evenly.

Clamping Sleeve Position





- Install the clamping sleeve so that the bolt end - arrow - does not project beyond the lower edge of the clamping sleeve.

• Threaded connection points toward the right.

Installed Position of Clamping Sleeve (for Repairs)





- Install the clamping sleeve so that the bolt end - arrow - does not project beyond the lower edge of the clamping sleeve.

• Threaded connection points toward the right.